Free Local Delivery - CAN Wide Shipping
Mixing Ratio: Equal parts Resin to Hardener (1 : 1)
Pot Life (Working Time): 40 minutes @ +20°C (+68°F)
Drying Time: Dry to touch 16 hours @ +26°C (+79°F) | Full cure 72 hours @ +26°C (+79°F)
Temperature variance will affect curing time; we do not recommend application below +10°C (+50°F).
Appearance & Finish: Clear and Glossy
Solids Content: 100% (ASTM D2697)
VOC Content: Part A Resin and Part B Hardener combined contain 0 g/L of VOC
Viscosity: 1400 CPS @ +25°C
Specific Weights: Resin 4.35 kg (9.6 lbs) / 3.78L (1USG) | Hardener 3.67 kg (8.1 lbs) / 3.78L (1USG)
Temperature Limits: Dry Heat +110°C (+230°F)
Spills +66°C (+150°F)
Immersion +66°C (+150°F)
Cold -40°C (-40°F)
Above temperature limits are laboratory test results. Our Epoxy Resin is non-flammable.
Flash Point: Greater than +280°C (+536°C)
Cured Resin Performance:
Elongation at break 30 – 80% depending on temperature (ASTM D638)
Adhesion 350 psi (ASTM D4541)
Fungus/Bacteria resistance resulted in no support of growth (Mil-F-52505)
Clean Up: Disposable mixing containers/tools are recommended. Otherwise, a solvent based cleaner can be used.
Shipping Information: Class 8 DG, UN 1760, PG III (Part B Hardener only)
Shelf Life: Approximately 1 year unopened